Specifications:
Premium professional grade toner refill. This toner produces high quality text and graphics on plain paper. Each factory sealed bottle contains one pre-measured refill specifically formulated for use in the cartridges and printer models shown below. Our refill kits and accessories are intended to be used with original OEM cartridges only.

Reset Options:
Brother printers with toner page counters like the models listed below must be reset when the toner light comes on. Otherwise, the printer will stop printing even though the cartridge has toner in it. The printer can be reset two ways...1) mechanically - by setting the reset gear on the back of the toner cartridge...or...2) electronically - through the operation panel. We only support the electronic method at this time. It is the easiest method and it also allows you to reuse the starter cartridges. Reset gears are available in the Accessory section above if they are your preferred method of reset but we do not provide installation instructions. All regular replacement cartridges are equipped with reset gears. The starter cartridges that come with the printer cannot be equipped with a reset gear. Therefore, you will not be able to reuse the starter cartridges if you intend to use the mechanical reset method. Our gear turns TN221 standard color cartridges into TN225 high yield color cartridges.

Refill Method Overview:
Simple instructions show where to make a hole in the cartridge for easy refilling. Our Universal Hole Tool is recommended because it makes a clean fill hole quickly and easily without creating shavings that can fall into the cartridge like drilling does. This tool operates on 110V~120V power. Refilling time is approximately 10 minutes / 15 minutes with chip.

Compatible with the following cartridges/printers:
Brother
TN221BK TN221C TN221M TN221Y TN225C TN225M TN225Y, HL-3140C HL-3140Cw HL-3170C HL-3170Cdw, MFC-9130C MFC-9130Cw MFC-9140C MFC-9140Cdn MFC-9330C MFC-9330Cdw MFC-9340C MFC-9340Cdw