Do-it-yourself Toner Cartridge Refill Kits

Specifications:
Premium professional grade toner refill. This toner produces high quality text and graphics on plain paper. Each factory sealed bottle contains one pre-measured refill specifically formulated for use in the cartridges and printer models shown below. Our refill kits and accessories are intended to be used with original OEM cartridges only.

Reset Options:
Brother printers with toner page counters like the models listed below must be reset when the toner light comes on. Otherwise, the printer will stop printing even though the cartridge has toner in it. The printer can be reset two ways...1) mechanically - by setting the reset gear on the back of the toner cartridge...or...2) electronically - through the operation panel. We only support the electronic method at this time. It is the easiest method and it also allows you to reuse the starter cartridges. Reset gears are available in the Accessory section above if they are your preferred method of reset but we do not provide installation instructions. All regular replacement cartridges are equipped with reset gears. The starter cartridges that come with the printer cannot be equipped with a reset gear. Therefore, you will not be able to reuse the starter cartridges if you intend to use the mechanical reset method.

Refill Method Overview:
Simple instructions show where the existing factory fill hole is located. This hole can be used to refill the cartridge easily. Only a screwdriver and pliers are needed.
Refilling time is approximately 10 minutes.

Compatible with the following cartridges/printers:
Brother
TN210BK TN210C TN210M TN210Y, DR210BK DR210CL, HL-3040C HL-3040CN HL-3045C HL-3045CN HL-3050C HL-3050CN HL-3070C HL-3070CW HL-3075C HL-3075CW, MFC-9010C MFC-9010CN MFC-9120C MFC-9120CN MFC-9125C MFC-9125CN MFC-9320C MFC-9320CW MFC-9325C MFC-9325CW